Custom fasteners and components made to your drawing.
When a standard catalog fastener does not meet the requirement, Webson Fasteners can source made-to-print parts through qualified manufacturing partners. We support custom screws, bolts, studs, pins, spacers, bushings, inserts and other specialized components manufactured to customer drawings and specifications.
Webson coordinates primary manufacturing, secondary operations, finishing and order documentation through one experienced, AS9120B and ISO 9001 certified source.
Special parts for requirements a catalog cannot fill.
Custom fasteners may be required because of a unique dimension, material, thread, head style, drive, finish or application requirement. Webson can review customer drawings and coordinate manufacturing for recurring production, replacement and specialized hardware needs.
Custom Screws and Bolts
Special head styles, drives, threads, lengths and dimensional configurations manufactured according to customer drawings.
Studs and Threaded Components
Fully threaded, partially threaded and specially configured components for mounting, fastening and assembly.
Pins and Shafts
Precision components used for locating, alignment, pivoting, retention and mechanical assembly.
Spacers and Standoffs
Custom lengths, diameters, threads and configurations for electronic, panel and mechanical assemblies.
Bushings and Sleeves
Cylindrical components manufactured for spacing, support, alignment, isolation or wear applications.
Custom Nuts and Inserts
Internally threaded components designed for specialized mounting, installation and retention requirements.
Cold-Formed Parts
Components formed through production processes suited to repeatable shapes and recurring volume requirements.
Machined Components
Milled, turned and broached components manufactured when the required geometry is not available as a standard fastener.
Have a drawing or existing sample? Send Webson the available specifications, quantities, material and finishing requirements for review.
Request a Custom Quote →The appropriate process for the part and requirement.
The most appropriate manufacturing method depends on the component geometry, material, tolerance requirements and production quantity. Webson works with qualified sources to coordinate the required process.
Turning
Rotational components such as pins, studs, bushings, spacers and shafts produced to drawing requirements.
Milling
Components with flats, slots, multiple features or geometries that require controlled material removal.
Cold Forming
Repeatable fasteners and components formed from wire or stock for suitable production requirements.
Broaching
Internal or external features produced when the drawing requires a specific profile, drive or keyed configuration.
Webson reviews the drawing and purchasing requirements to identify suitable manufacturing sources. Final production requirements remain controlled by the customer’s drawing, specification and purchase order.
Finished components from a single coordinated source.
A custom component may require additional processing after its primary shape has been produced. Webson can coordinate secondary operations and finishing so customers receive a completed part without managing multiple suppliers.
Heat Treatment
Coordinated processing according to the material and performance requirements identified on the drawing or purchase order.
Plating
Finishing coordinated according to the required plating specification, material and application.
Alodine
Conversion coating for applicable components when required by the customer drawing or specification.
Zinc Finishes
Zinc finishing options coordinated according to the required specification and application.
Controlled Bake and 24-Hour Bake
Post-plating bake requirements coordinated when specified for hydrogen-embrittlement relief.
Thread Patching and Locking Features
Patching and locking treatments coordinated when identified by the drawing, part specification or purchase order.
Custom Kitting and Packaging
Finished components can be grouped, identified and packaged according to assembly or production requirements.
Finish availability and processing requirements depend on the component material, geometry, applicable specification and customer drawing.
From customer drawing to finished part.
-
01
Submit the Requirement
Provide the drawing, revision, quantity, material, finish, required documentation and requested delivery information.
-
02
Requirement Review
Webson reviews the submitted information for sourcing and quotation. Questions or missing requirements are identified before the order proceeds.
-
03
Manufacturing Coordination
The component is sourced through a manufacturing process appropriate for its geometry, material and production requirements.
-
04
Secondary Processing
Required heat treatment, plating, coating, patching, baking or other specified operations are coordinated.
-
05
Documentation and Delivery
Finished parts and applicable order documentation are supplied according to the approved purchasing requirements.
Webson does not replace the customer’s engineering or design authority. Drawings, revisions, specifications and acceptance requirements must be provided or approved by the customer.
Controlled requirements from quotation through delivery.
Drawing-based components require careful control of revisions, materials, processes and documentation. Webson supports custom requirements through its AS9120B and ISO 9001 certified quality-management system.
Drawing and Revision Control
The applicable customer drawing and revision should be identified with the RFQ and purchase order.
Material Requirements
Material type, grade and any required supporting documentation should be clearly specified.
Process Requirements
Heat treatment, plating, coating, baking and other special-process requirements should be identified on the drawing or order.
Order Documentation
Applicable certifications and traceability documents can be supplied according to the component and customer requirements.
Supplier Coordination
Webson coordinates requirements with manufacturing and processing sources through one purchasing relationship.
Custom hardware for specialized assemblies.
Aerospace and Defense
Drawing-based and specification-controlled components for airframe, avionics, ground equipment and defense applications.
Electronics
Custom spacers, standoffs, bushings, mounting components and panel hardware for electronic assemblies.
Medical Equipment
Special hardware for medical devices, equipment housings and supporting mechanical assemblies.
Enclosures and Cabinets
Custom hinges, pins, bushings, latches, mounting components and fastening hardware.
Industrial Equipment
Made-to-print parts for machinery, production equipment and specialized mechanical systems.
Replacement and Legacy Requirements
Special components sourced from available drawings or specifications when standard catalog products are not suitable.
One source for the part and its required processes.
Webson combines fastener knowledge, drawing-based sourcing and quality-system controls to support customers whose requirements extend beyond standard catalog hardware.
Four Decades of Sourcing Experience
Webson has supplied standard, special and custom hardware to manufacturers since 1986.
Multiple Processes Through One Source
Coordinate manufacturing, heat treatment, plating, baking, patching and packaging through one supplier relationship.
Certified Quality System
Webson is certified to AS9120B and ISO 9001 for the distribution of fastening products and installation tooling.
Standard and Custom Consolidation
Combine commercial, electronic, Mil-Spec and made-to-print requirements through one experienced distributor.
Custom fastener questions.
What information should I provide for a custom fastener quote?
Provide the current drawing and revision, required quantity, material, finish, tolerances, special-process requirements, required documentation and requested delivery date. Include any applicable specifications or approved manufacturer requirements.
Can Webson manufacture a part from a customer drawing?
Webson can review customer drawings and coordinate production through qualified manufacturing sources. The drawing, revision and purchase-order requirements control the finished component.
Which custom manufacturing processes are available?
Webson can coordinate turned, milled, cold-formed and broached components, depending on the part geometry, material, quantity and drawing requirements.
Can Webson coordinate plating and heat treatment?
Yes. Webson can coordinate required plating, heat treatment, Alodine, zinc finishes, post-plating baking, thread patching and other specified secondary operations. Availability depends on the individual component and specification.
Can Webson supply documentation with a custom part?
Applicable certifications, traceability and order documentation can be supplied according to the component and customer requirements. All documentation requirements should be stated with the RFQ and purchase order.
Can Webson review both prototype and production quantities?
Webson can review different quantity requirements, but manufacturing options, pricing and minimum quantities depend on the component, process and manufacturing source. Submit the required quantity for evaluation.
Can standard and custom fasteners be quoted together?
Yes. Customers can submit bills of material containing commercial fasteners, electronic hardware, Mil-Spec components and made-to-print parts for review through one Webson RFQ.
More from Webson Fasteners.
Commercial Hardware
Bolts, screws, studs, nuts, washers and related standard fasteners for manufacturing and assembly.
Mil-Spec Hardware
AN, MS, NAS and NASM hardware supplied to specification with aerospace-grade traceability.
Value-Added Services
Vendor-managed inventory, bin stocking, custom kitting and scheduled programs.
Have a drawing or custom fastener requirement?
Send Webson your drawing, revision, quantity, material, finish and documentation requirements. Our team will review the requirement and prepare a quote.