// PRODUCT SELECTION
Hydraulic fittings identified by both end connections.
A fitting must match the connection and sealing arrangement at each end. Send Webson the complete manufacturer number or drawing, including the required series, material and system conditions, for a sourcing review and quote.
Request a hydraulic fitting quote →Pricing and availability confirmed with quotation.
Identify the complete connection arrangement
On a small screen, scroll sideways to see the full table.
| Component | What it does | What to specify |
|---|---|---|
| Straight adapters | Connect the two specified interfaces in line. | Full end designations, body dimensions, material and series. |
| Elbows, tees and shaped adapters | Use a defined geometry between connections. | Each end, orientation, dimensions and installation envelope. |
| Port connections | Match the selected equipment port and sealing arrangement. | Exact port standard, thread, seal and adjustment features. |
| Tube or hose interfaces | Use the matched product system and end preparation. | Complete series and approved mating components or assembly requirement. |
Describe each end separately
Identify nominal size, thread form and sealing geometry for each connection. Outside measurements and a photograph can help identification, but they do not establish the pressure rating or compatibility of a proposed replacement.
On a small screen, scroll sideways to see the full table.
| Feature | Information to send | What to check |
|---|---|---|
| End A and end B | Complete connection designation at each end. | Check thread, seat, seal and mating interface together. |
| Geometry | Straight or shaped body, angle, orientation and dimensions. | Confirm routing, clearance and access for installation. |
| Material and seals | Body material, finish and specified seal compound or components. | Keep fluid and environmental compatibility requirements explicit. |
| System conditions | Required pressure, temperature, media and applicable specifications. | Verify the exact product and complete connection arrangement against the approved requirement. |
Preserve the approved fitting system
Use the original manufacturer series or an approved replacement requirement. Include pressure, temperature, fluid and seal specifications with the inquiry. Do not mix parts or assume equivalence based only on nominal thread size or appearance.
Ordering replacements and complete adapter lists
Keep each fitting’s full designation and end configuration on the bill of material. If the original number is unknown, provide the equipment documentation and mating-connection details for identification. Installation follows the selected product and system instructions.
Before you order
Does the thread alone identify a hydraulic connection?
No. Sealing geometry, port or connection standard and mating components also matter.
Can a picture establish the pressure rating?
No. Use the exact part data and approved system requirement. Photos can support identification but cannot replace that information.
What should I provide for an adapter?
Identify every end, body geometry, material and required system conditions, preferably with the full manufacturer number or drawing.
Send both connections and the system requirement
Include manufacturer and full designation, quantity and delivery date. Add each end configuration, body geometry, material, seals, service conditions and required documentation or source restrictions.
Request a hydraulic fitting quote →Webson is an AS9120B and ISO 9001:2015 certified distributor. Include required certificates and traceability with your inquiry. View our certificate and quality scope.
Webson Fasteners · Serving customers since 1986 · Deer Park, New York