Commercial fasteners for production, maintenance and assembly.
Webson Fasteners supplies commercial bolts, screws, studs, nuts, washers and related hardware for manufacturing, fabrication, equipment assembly and maintenance requirements.
Our commercial product range includes standard inch and metric fasteners in steel, stainless steel, brass and nylon. Many common requirements are stocked for immediate release, while non-stock and specialized items can be sourced through Webson’s established manufacturing network.

A broad fastener range from one experienced supplier.
Production and maintenance bills of material often contain multiple fastener types, sizes, materials and finishes. Webson helps customers consolidate those requirements through one distributor.
Submit an individual part number, a recurring purchase list or a complete bill of material. Webson can quote stocked products, source non-stock requirements and review specialized hardware needs.
Hex Bolts and Cap Screws
Match thread, grip, head, material grade and finish to the specified joint.
Machine Screws
Threaded fasteners for panels and equipment. Check head, thread, length and material requirements.
Socket Screws
Socket-drive screws with specified head forms. Compare head clearance, drive, length and grade.
Studs
Specify each end, the mounting arrangement and installed projection.
Threaded Rod
Define the thread, grade, supplied length and finished-end requirements.
Nuts
Plain, locking and specialty nuts. Identify thread, grade, envelope and finish.
Washers
Bearing washers, shims and specified locking systems. Check bore, outside diameter and thickness.
Pins
Locating and retaining pins. Match the pin family, diameter, engagement and receiving hole.
Retaining Rings and Clips
Retention for shafts, housings and panels. Identify the groove or mating geometry.
Threaded Inserts
Threaded interfaces for plastic and metal parts. Match parent material and installation method.
Security Screws
Identify the exact drive, matching tool and service-access requirement.
Shims
Controlled spacing parts. Specify thickness limits, profile, material and supplied pack.
Self-Clinching Fasteners
Panel nuts, studs and standoffs. Match sheet material, thickness, hardness and installation.
Bearings
Identify the complete designation, dimensions, seals and required configuration.
Casters
Match mounting, installed height, wheel, brake function and operating requirements.
Hydraulic Fittings
Identify both connection ends, sealing geometry, series and system requirements.
Do not see the fastener you need? Send Webson the part number, description, dimensions or drawing. Our team can review standard, non-stock and special requirements.
Submit Your Fastener List →Specified for the joint, environment and assembly.
Commercial fasteners are selected according to their dimensions, thread system, material, strength, finish and application requirements. Providing complete specifications helps Webson identify and quote the correct product.
Steel
A widely used fastener material available in different strength levels and finishes for general industrial and manufacturing applications.
Stainless Steel
Corrosion-resistant hardware for equipment, exterior, medical, electronics and other applications where material performance or appearance is important.
Brass
Nonferrous fasteners used in electrical, electronic, decorative and corrosion-sensitive applications.
Nylon
Lightweight, nonconductive hardware used where electrical isolation, corrosion resistance or reduced component weight is required.
Inch and Metric
Standard fasteners can be sourced in inch and metric thread systems according to the applicable part number and dimensional requirements.
Thread, Head and Drive Options
Fasteners are available in multiple thread forms, head styles and drive configurations. Include the complete description or part number with the RFQ.
Strength and Finish Requirements
Grade, property class, heat treatment and finish can affect fastener performance and interchangeability. These requirements should be included whenever applicable.
Standard and Special Dimensions
Webson can quote standard catalog sizes and review nonstandard dimensions or drawing-based requirements.
Include the fastener type, diameter, thread, length, material, grade or property class, finish and quantity whenever available.
Fasteners for manufacturing, equipment and ongoing maintenance.
Production Assembly
Standard and specialty fasteners used in recurring manufacturing and assembly operations.
Equipment and Machinery
Bolts, screws, nuts, washers, pins and retaining components used throughout industrial equipment.
Fabrication
Hardware for sheet-metal, structural, enclosure and general fabricated assemblies.
Electronics and Enclosures
Fasteners and supporting hardware for panels, chassis, cabinets, racks and electronic equipment.
Maintenance and Repair
Replacement hardware for plant maintenance, equipment repair and ongoing operating requirements.
General Industrial Use
Commercial fasteners for manufacturers, contractors, service organizations and other industrial customers.
Panel, chassis and enclosure builds often pair commercial fasteners with electronic hardware such as standoffs, spacers and captive panel components. Webson supports electronics manufacturers across both categories.
Stocked products and responsive sourcing support.
Webson stocks a broad range of common commercial fasteners for immediate release and sources products that fall outside normal inventory. Customers can use Webson for both routine hardware and more specialized requirements.
Stocked Commercial Hardware
Common fastener types, materials and sizes are maintained for recurring customer requirements and immediate release when available.
Non-Stock Sourcing
Webson can review and source less common sizes, materials, finishes and configurations.
Part-Number Matching
Submit manufacturer part numbers, customer part numbers or existing purchase information for quotation.
Bill-of-Material Consolidation
Multiple commercial, electronic, custom and Mil-Spec requirements can be combined through one supplier.
Drawing-Based Requirements
When a standard catalog fastener does not meet the requirement, Webson can review drawings and coordinate custom manufacturing.
Programs for recurring fastener requirements.
Commercial fasteners are often low-cost components with a high impact on production continuity. Webson’s value-added services help customers organize, replenish and distribute recurring hardware requirements.
Vendor-Managed Inventory
Recurring fastener requirements can be organized into a replenishment program based on customer usage and inventory needs.
Bin Stocking
Frequently used hardware can be organized and replenished at designated stocking or point-of-use locations.
Custom Kitting
Fasteners and related components can be grouped and packaged for a particular assembly, production stage or bill of material.
Scheduled and Just-in-Time Programs
Recurring requirements can be coordinated around planned releases and customer production schedules.
More than a general fastener catalog.
Since 1986, Webson Fasteners has supplied commercial, electronic, custom and Mil-Spec hardware to manufacturers with demanding purchasing and production requirements.
Broad Product Coverage
Source commercial fasteners, electronic hardware, custom components and Mil-Spec products through one distributor.
Stock and Source Capabilities
Webson combines stocked commercial hardware with sourcing support for less common requirements.
Certified Quality System
Webson is certified to AS9120B and ISO 9001 for the distribution of fastening products and installation tooling.
Four Decades of Experience
Webson has supported manufacturers with fastening products and sourcing programs since 1986.
Commercial fastener questions.
Does Webson supply both inch and metric fasteners?
Yes. Webson supplies and sources commercial fasteners in standard inch and metric thread systems. Include the required diameter, thread, length, material, finish and quantity with the RFQ.
Which fastener materials does Webson supply?
Webson’s commercial fastener range includes steel, stainless steel, brass and nylon. Other material requirements can be reviewed according to the applicable part number, drawing and quantity.
Can Webson source fasteners that are not in stock?
Yes. Webson stocks many common commercial fasteners and can source non-stock sizes, materials, finishes and specialty configurations through its manufacturing network.
Can I submit a complete purchase list or bill of material?
Yes. Customers can submit individual part numbers, recurring purchase lists or complete bills of material. Webson can review requirements across commercial, electronic, custom and Mil-Spec product categories.
Can Webson supply special finishes?
Webson can review requirements for different commercial and application-specific finishes. Include the required finish, specification and any supporting documentation with the RFQ.
Can commercial fasteners be included in a vendor-managed inventory program?
Yes. Recurring fastener requirements can be evaluated for vendor-managed inventory, bin stocking, custom kitting and scheduled-release programs.
What information should I include with a commercial fastener RFQ?
Provide the fastener type, diameter, thread, length, material, grade or property class, finish, quantity and required delivery date whenever available. Part numbers, drawings, purchase lists and supporting specifications can be attached to Webson’s RFQ form.
More from Webson Fasteners.
Electronic Hardware
Standoffs, spacers, handles, knobs and mounting hardware for PCBs, panels and chassis.
Mil-Spec Hardware
AN, MS, NAS and NASM hardware supplied to specification with aerospace-grade traceability.
Value-Added Services
Vendor-managed inventory, bin stocking, custom kitting and scheduled programs.
Have a commercial fastener requirement?
Send Webson your part numbers, purchase list, drawings, quantities and required specifications. Our team will review the requirement and prepare a quote.