// ELECTRONIC HARDWARE
Cable clamps for chassis and equipment wiring.
A cable clamp holds a cable, bundle or tube along its intended route. Start with the size being supported and the mounting surface, then check the clamp’s closure, material and clearance. Send Webson the part number or routing requirement for a quote.
Request a cable clamp quote →Pricing and availability confirmed with quotation.
Match support style to the assembly sequence
On a small screen, scroll sideways to see the full table.
| Component | What it does | What to specify |
|---|---|---|
| P-style clamps | Wrap around the supported item and attach at a mounting point. | Bundle size, mounting hole, width and mounting offset. |
| Cushioned clamps | Use a specified lining between the clamp and supported item. | Cushion material, fit, environmental conditions and part designation. |
| Molded cable clamps | Provide a shaped support or closure in a specified plastic. | Cable range, mounting method, material grade and operating environment. |
| Snap or blind-mount styles | Use the specified panel attachment or closure arrangement. | Hole and panel requirements, closure access and whether the cable is fitted before or after mounting. |
Check the cable fit and mounting fit separately
A nominal clamp size does not define every installation dimension. Compare the supported diameter, mounting-hole size and distance from the mounting point to the cable route. Leave access to install and service the clamp without forcing the cable into an unsuitable bend.
On a small screen, scroll sideways to see the full table.
| Feature | Information to send | What to check |
|---|---|---|
| Supported diameter | Actual cable, sleeved bundle or tube outside size. | Use the manufacturer’s stated fit or clamping range. |
| Mounting feature | Hole size, fastener or specified push-in attachment. | Match the panel thickness and hole preparation where required. |
| Clamp width and offset | Width at the supported item and position relative to the mounting point. | Check neighboring wiring, panels and covers. |
| Lining or cushion | Material and thickness for the selected part. | Include temperature, chemical and cable-jacket compatibility requirements. |
| Access and closure | How the clamp opens, closes and is fixed in place. | Check installation order and service access. |
State what the clamp will be exposed to
Include temperature, fluids, cleaning agents, outdoor exposure and any specified vibration or retention requirement. Metal, cushion and molded materials should be identified by the drawing or full part number. A cushioned appearance alone does not establish a rating.
Support along the route and protection at the panel
Clamps organize and support wiring inside chassis, cabinets and equipment. At a panel pass-through, a separate grommet, bushing or strain-relief product may be required. Identify whether the clamp is for routing, a defined retention load or another specified function.
Before you order
Is the mounting screw size the clamp size?
No. The clamp size describes the supported item under the manufacturer’s convention. The mounting hole and compatible fastener are separate details.
Can a cushioned clamp replace an unlined clamp?
Compare the full dimensions, material and function. The lining changes the interface and may change the fit or environmental suitability.
Does any cable clamp provide strain relief?
Use the part’s stated function and retention data. A routing support is not automatically a qualified strain-relief arrangement.
Include the bundle and mounting details
Send the complete part number or drawing, quantity, requested delivery date, supported diameter, mounting details and material. Include cushion specifications, service conditions and required documentation.
Request a cable clamp quote →Webson is an AS9120B and ISO 9001:2015 certified distributor. Include required certificates and traceability with your inquiry. View our certificate and quality scope.
Webson Fasteners · Serving customers since 1986 · Deer Park, New York