// TECHNICAL RESOURCES
MS15795 stainless flat washers.
Compare selected stocked MS15795 stainless flat washers by nominal inside diameter, outside diameter, thickness and finish.
// DIMENSION GUIDE
Washer inside diameter, outside diameter and thickness
Schematic only; not to scale. Letter labels are keys for this illustration. Use the applicable part specification for dimensions, tolerances and measurement conventions.
// PART IDENTIFICATION
Match all three washer dimensions
MS15795 covers general-purpose round flat metal washers. The selected stocked entries below belong to the 300-series corrosion-resistant steel group.
Inside diameter, outside diameter and thickness each affect selection. The screw-size reference identifies the intended nominal fastener size.
// STOCKED SELECTION
Stocked MS15795 part numbers
Selected stocked configurations are listed below. Dimensions are nominal identification references in inches; use the controlling specification and drawing for full tolerances and acceptance requirements.
No matching entries. Clear the filters or try a shorter search.
| Part number | Screw / bolt size (ref) | Nominal ID (in) | Nominal OD (in) | Nominal thickness (in) | Material / finish | Stock status | Request pricing |
|---|---|---|---|---|---|---|---|
| MS15795-803B | #4 | 0.125 | 0.250 | 0.022 | Black-oxide 300-series CRES | Stocked item | Quote MS15795-803B → |
| MS15795-806B | #6 | 0.156 | 0.375 | 0.049 | Black-oxide 300-series CRES | Stocked item | Quote MS15795-806B → |
| MS15795-813 | 3/8 | 0.406 | 0.812 | 0.065 | Passivated 300-series CRES | Stocked item | Quote MS15795-813 → |
| MS15795-805 | #6 | 0.156 | 0.312 | 0.035 | Passivated 300-series CRES | Stocked item | Quote MS15795-805 → |
| MS15795-803 | #4 | 0.125 | 0.250 | 0.022 | Passivated 300-series CRES | Stocked item | Quote MS15795-803 → |
| MS15795-810 | 1/4 | 0.281 | 0.625 | 0.065 | Passivated 300-series CRES | Stocked item | Quote MS15795-810 → |
| MS15795-812 | 5/16 | 0.344 | 0.688 | 0.065 | Passivated 300-series CRES | Stocked item | Quote MS15795-812 → |
| MS15795-808B | #10 | 0.219 | 0.438 | 0.049 | Black-oxide 300-series CRES | Stocked item | Quote MS15795-808B → |
| MS15795-807 | #8 | 0.188 | 0.375 | 0.049 | Passivated 300-series CRES | Stocked item | Quote MS15795-807 → |
Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.
// SIZE COMPARISON
One fastener size can have different washer proportions
MS15795-805 and MS15795-806 both reference a #6 fastener and a nominal 0.156-inch inside diameter. Their nominal outside diameters are 0.312 and 0.375 inch, with thicknesses of 0.035 and 0.049 inch respectively.
The nominal values support identification. Drawing limits govern inspection and acceptance.
// FINISH IDENTIFICATION
Retain the finish suffix
The selected unsuffixed stainless entries are passivated. A terminal B identifies the black-oxide finish in the selected stocked parts, including MS15795-803B, MS15795-806B and MS15795-808B.
Keep that suffix in the quote request so the required finish follows the part number.
// RELATED REFERENCES
Compare related washer families
AN960, NAS1149 and NAS620 have their own size, thickness and material codes. Provide the exact washer designation and applicable issue when sourcing a replacement or reviewing an alternate.
// BUYER CHECKLIST
Prepare the requirement for quotation
- Complete designation, including all material, finish and locking suffixes.
- Quantity, required delivery date and controlling drawing or specification issue.
- Required certificates, source restrictions and lot traceability.
// SOURCE WITH WEBSON
Have a part number or bill of material?
Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.