// TECHNICAL RESOURCES
MS16535 oval-head tubular rivets.
Find selected stocked MS16535 tubular rivets in aluminum, nickel-plated brass and carbon steel, with body-diameter limits and nominal lengths.
// PART IDENTIFICATION
Oval head with a tubular end
MS16535 identifies oval-head tubular rivets. The tubular end is formed during installation, so body diameter, under-head length and the required upset all belong in the requirement.
// STOCKED SELECTION
Stocked MS16535 part numbers
Selected stocked configurations are listed below. Dimensions are nominal identification references in inches; use the controlling specification and drawing for full tolerances and acceptance requirements.
No matching entries. Clear the filters or try a shorter search.
| Part number | Body diameter limits (in) | Nominal under-head length (in) | Material / configuration | Stock status | Request pricing |
|---|---|---|---|---|---|
| MS16535-77 | 0.085–0.089 | 5/32 | Aluminum; oval head | Stocked item | Quote MS16535-77 → |
| MS16535-66N | 0.085–0.089 | 3/16 | Nickel-plated brass; oval head | Stocked item | Quote MS16535-66N → |
| MS16535-3 | 0.058–0.061 | 5/32 | Cadmium-plated carbon steel; oval head | Stocked item | Quote MS16535-3 → |
Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.
// DIMENSION REFERENCE
Read body diameter separately from the hole size
The selected MS16535-77 and MS16535-66N rivets have body-diameter limits of 0.085–0.089 inch. MS16535-3 uses a smaller 0.058–0.061-inch body.
The mounting-hole requirement and tubular-end dimensions are separate drawing features. The table length is measured beneath the oval head.
// MATERIAL AND FINISH
Preserve the material and finish designation
MS16535-77 is aluminum, MS16535-66N is nickel-plated brass and MS16535-3 is cadmium-plated carbon steel. The N finish identifier on the brass entry must remain in the part number.
// SOURCE WITH WEBSON
Specify the complete rivet requirement
Include the full designation, quantity, material-stack thickness, installation requirements and required documentation with your inquiry. MS20426 and MS20470 are separate solid-rivet families with different head configurations.
// BUYER CHECKLIST
Prepare the requirement for quotation
- Complete designation, including all material, finish and locking suffixes.
- Quantity, required delivery date and controlling drawing or specification issue.
- Required certificates, source restrictions and lot traceability.
// SOURCE WITH WEBSON
Have a part number or bill of material?
Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.