// TECHNICAL RESOURCES
MS16633 external E retaining rings.
Look up selected stocked MS16633 external E-rings by shaft-diameter reference, basic ring thickness and material/finish.
// PART IDENTIFICATION
External E-type retaining rings
MS16633 identifies reduced-section external E retaining rings. The ring seats in a shaft groove to retain a component axially.
The shaft diameter, groove geometry and retained-part geometry work together in selecting the required ring.
// STOCKED SELECTION
Stocked MS16633 part numbers
Selected stocked configurations are listed below. Dimensions are nominal identification references in inches; use the controlling specification and drawing for full tolerances and acceptance requirements.
No matching entries. Clear the filters or try a shorter search.
| Part number | Shaft diameter reference (in) | Basic ring thickness T (in) | Material / finish | Stock status | Request pricing |
|---|---|---|---|---|---|
| MS16633-1014 | 0.140 | 0.025 | Cadmium-plated carbon spring steel | Stocked item | Quote MS16633-1014 → |
| MS16633-4006 | 0.062 | 0.010 | Passivated CRES | Stocked item | Quote MS16633-4006 → |
| MS16633-4009 | 0.094 | 0.015 | Passivated CRES | Stocked item | Quote MS16633-4009 → |
| MS16633-4018 | 0.188 | 0.025 | Passivated CRES | Stocked item | Quote MS16633-4018 → |
Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.
T is the basic thickness dimension. Finished thickness limits include the material and finish allowances specified in the drawing.
// SIZE SELECTION
A shaft reference is different from a free ring diameter
MS16633-4006 references a 0.062-inch shaft, while MS16633-4009 references a 0.094-inch shaft. The free ring opening and groove diameter have separate dimensions.
Use the specified groove diameter, width and corner geometry when reviewing the application.
// MATERIAL IDENTIFICATION
The dash number carries the material group
MS16633-1014 is a cadmium-plated carbon spring steel selection. The selected -4006, -4009 and -4018 entries are passivated corrosion-resistant steel.
Retain the full dash number when ordering so the required size, material and finish remain together.
// SOURCE WITH WEBSON
Send the application requirement
Provide the complete part number, quantity, required date, governing issue and certification requirements. Include any application drawing or approved-source requirements that affect the order.
// BUYER CHECKLIST
Prepare the requirement for quotation
- Complete designation, including all material, finish and locking suffixes.
- Quantity, required delivery date and controlling drawing or specification issue.
- Required certificates, source restrictions and lot traceability.
// SOURCE WITH WEBSON
Have a part number or bill of material?
Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.