Skip to content

// TECHNICAL RESOURCES

MS35338 helical spring lock washers.

Identify selected stocked MS35338 regular-series spring lock washers, compare opening diameter, outside diameter, section thickness and material groups, and request a quote from Webson.

// PART IDENTIFICATION

Identify the regular helical-spring family

MS35338 covers regular, or medium-series, helical spring lock washers. Their split spring form differs from flat washers and internal- or external-tooth lock washers.

The required washer style and material belong in the callout; the mating screw size alone does not identify an alternate.

// STOCKED SELECTION

Stocked MS35338 part numbers

Selected stocked configurations are listed below. Dimensions are in inches; nominal values and minimum–maximum limits are identified in the headings.

Scroll sideways to see all columns. The first column stays visible.

MS35338 stocked washer references
Part numberScrew / bolt size (ref)ID limits (in)OD max (in)Section thickness limits (in)Material / finish groupStock statusRequest pricing
MS35338-40#4.114–.120.209.025–0.033Plated carbon steelStocked itemQuote MS35338-40 →
MS35338-135#4.114–.120.209.025–0.033Passivated CRESStocked itemQuote MS35338-135 →
MS35338-41#6.141–.148.250.031–0.039Plated carbon steelStocked itemQuote MS35338-41 →
MS35338-136#6.141–.148.250.031–0.039Passivated CRESStocked itemQuote MS35338-136 →
MS35338-96#2.088–.094.172.020–0.028Phosphor bronze / tin-brass optionStocked itemQuote MS35338-96 →
MS35338-134#2.088–.094.172.020–0.028Passivated CRESStocked itemQuote MS35338-134 →
MS35338-1413/8.377–.385.680.094–0.104Passivated CRESStocked itemQuote MS35338-141 →
MS35338-1391/4.252–.260.487.062–0.072Passivated CRESStocked itemQuote MS35338-139 →
MS35338-137#8.167–.174.293.040–0.048Passivated CRESStocked itemQuote MS35338-137 →
MS35338-42#8.167–.174.293.040–0.048Plated carbon steelStocked itemQuote MS35338-42 →
MS35338-138#10.193–.200.334.047–0.055Passivated CRESStocked itemQuote MS35338-138 →
MS35338-39#2.088–.094.172.020–0.028Plated carbon steelStocked itemQuote MS35338-39 →

Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.

These dimensional limits summarize the reviewed MS35338L reference. Section thickness is the thickness of the washer material, not its free spring height. See the dimensional and material tables below for other reference sizes.

// DIMENSIONAL REFERENCE

MS35338 dimensional lookup

Dimensions are in inches and summarize MS35338 revision L. A is the opening diameter, B the outside diameter, W the section width and C the section thickness. The nominal screw size is not the washer opening diameter.

Scroll sideways to see all columns. The first column stays visible.

MS35338 regular-series dimensions
Nominal screw sizeID A limits (in)OD B max (in)Width W min (in)Thickness C limits (in)
#2.088–.094.172.035.020–0.028
#4.114–.120.209.040.025–0.033
#6.141–.148.250.047.031–0.039
#8.167–.174.293.055.040–0.048
#10.193–.200.334.062.047–0.055
1/4.252–.260.487.108.062–0.072
5/16.314–.322.583.125.078–0.088
3/8.377–.385.680.141.094–0.104
7/16.440–.450.776.156.109–0.119
1/2.502–.512.869.171.125–0.135
9/16.564–.574.965.188.141–0.151
5/8.628–.6411.073.203.156–0.166
3/4.753–.7661.265.234.188–0.198
7/8.878–.8941.459.266.219–0.239
11.003–1.0241.656.297.250–0.270
1-1/81.129–1.1531.847.328.281–0.301
1-1/41.254–1.2802.036.359.312–0.332
1-3/81.379–1.4082.219.391.344–0.364
1-1/21.504–1.5342.419.422.375–0.395

Section thickness is not the washer’s free spring height. The summary does not replace the controlling specification’s inspection and acceptance requirements.

// PART-NUMBER LOOKUP

Size and material dash-number reference

Compare the regular-series size across material groups. These reference designations are not an availability list. The selected stocked items remain identified in the stock table above.

Scroll sideways to see all columns. The first column stays visible.

MS35338 material and size designations
Nominal screw sizeCarbon steel, cadmium / zincCarbon steel, phosphatePhosphor bronze / tin brassNickel-copper-aluminumCRES, 300 seriesCRES, Type 420
#2MS35338-39MS35338-58MS35338-96MS35338-115MS35338-134MS35338-153
#4MS35338-40MS35338-59MS35338-97MS35338-116MS35338-135MS35338-154
#6MS35338-41MS35338-60MS35338-98MS35338-117MS35338-136MS35338-155
#8MS35338-42MS35338-61MS35338-99MS35338-118MS35338-137MS35338-156
#10MS35338-43MS35338-62MS35338-100MS35338-119MS35338-138MS35338-157
1/4MS35338-44MS35338-63MS35338-101MS35338-120MS35338-139MS35338-158
5/16MS35338-45MS35338-64MS35338-102MS35338-121MS35338-140MS35338-159
3/8MS35338-46MS35338-65MS35338-103MS35338-122MS35338-141MS35338-160
7/16MS35338-47MS35338-66MS35338-104MS35338-123MS35338-142MS35338-161
1/2MS35338-48MS35338-67MS35338-105MS35338-124MS35338-143MS35338-162
9/16MS35338-49MS35338-68MS35338-106MS35338-125MS35338-144MS35338-163
5/8MS35338-50MS35338-69MS35338-107MS35338-126MS35338-145MS35338-164
3/4MS35338-51MS35338-70MS35338-108MS35338-127MS35338-146MS35338-165
7/8MS35338-52MS35338-71MS35338-109MS35338-128MS35338-147MS35338-166
1MS35338-53MS35338-72MS35338-110MS35338-129MS35338-148MS35338-167
1-1/8MS35338-54MS35338-111MS35338-130MS35338-149MS35338-168
1-1/4MS35338-55MS35338-112MS35338-131MS35338-150MS35338-169
1-3/8MS35338-56MS35338-113MS35338-132MS35338-151MS35338-170
1-1/2MS35338-57MS35338-114MS35338-133MS35338-152MS35338-171

The CRES 300-series group uses Type 316 through 1/4 inch in revision L. The B suffix identifies the black-oxide option for the applicable CRES group; it is not added to the passivated designations shown here.

// PART-NUMBER EXAMPLES

Size and material share the dash-number table

MS35338-40 and MS35338-135 both reference a #4 screw size, but identify different material groups. The selected -39 through -42 entries are plated carbon steel; the selected -134 through -141 entries are passivated corrosion-resistant steel.

MS35338-96 is a #2 phosphor-bronze or tin-brass selection. It should not be grouped with the carbon-steel entries.

// DRAWING CHECK

Confirm the coating and section dimensions

A plated-carbon-steel reference does not resolve every coating requirement. Preserve the coating called out by the drawing and applicable standard issue.

The screw-size reference is not the measured hole diameter. Confirm the required inside diameter, outside envelope and washer section against the drawing before proposing an alternate.

// SOURCE WITH WEBSON

Related washer references

Include the complete part number, quantity, required delivery date and certification requirements with your inquiry.

// BUYER CHECKLIST

Prepare the requirement for quotation

// SOURCE WITH WEBSON

Have a part number or bill of material?

Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.

Certified distribution. Requirements reviewed.

Webson is an AS9120B and ISO 9001:2015 certified distributor. Include required certificates, lot traceability and source restrictions with your inquiry so documentation and inspection requirements can be reviewed for the order.