// TECHNICAL RESOURCES
MS20605 nonstructural flush blind rivets.
Find selected stocked MS20605 blind rivets, compare nominal diameters and grip ranges, and request pricing from Webson.
// DIMENSION GUIDE
Blind-rivet diameter and joint grip
Schematic only; not to scale. Letter labels are keys for this illustration. Use the applicable part specification for dimensions, tolerances and measurement conventions.
// PART IDENTIFICATION
Identify the nonstructural flush-head family
MS20605 identifies Class 2 nonstructural blind rivets with a 100-degree flush head. Retain the complete material, diameter and grip designation when requesting a quote.
This family should be distinguished from structural locked-spindle blind rivets and from solid rivets. Matching the diameter and head angle does not establish interchangeability.
// STOCKED SELECTION
Stocked MS20605 part numbers
Selected stocked configurations are listed below. Dimensions are nominal identification references in inches; use the controlling specification and drawing for full tolerances and acceptance requirements.
No matching entries. Clear the filters or try a shorter search.
| Part number | Nominal diameter (in) | Grip range (in) | Configuration | Stock status | Request pricing |
|---|---|---|---|---|---|
| MS20605AD3W3 | 3/32 | 0.126–0.187 | 100° flush head | Stocked item | Quote MS20605AD3W3 → |
| MS20605AD3W4 | 3/32 | 0.188–0.250 | 100° flush head | Stocked item | Quote MS20605AD3W4 → |
Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.
// SIZE SELECTION
Grip describes the material stack
Grip is the total thickness of the materials being joined. It is not the overall rivet length. The selected AD3W3 and AD3W4 entries have the same nominal diameter but different grip ranges.
Preserve AD and W in the complete callout. Confirm the required material, installation tooling and drawing before ordering.
// STANDARD STATUS
MS20605 and NASM20605
The legacy MS20605 document was canceled on August 18, 1998 and names NASM20605 as its successor. Submit the designation and specification issue required by your drawing. Document succession alone does not authorize a part substitution.
// RELATED REFERENCES
Compare rivet constructions
Include the full part number, quantity, material-stack thickness and required documentation with your inquiry.
// BUYER CHECKLIST
Prepare the requirement for quotation
- Complete designation, including all material, finish and locking suffixes.
- Quantity, required delivery date and controlling drawing or specification issue.
- Required certificates, source restrictions and lot traceability.
// SOURCE WITH WEBSON
Have a part number or bill of material?
Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.