// TECHNICAL RESOURCES
NAS1399 flush-head locked-spindle blind rivets.
Compare selected stocked NAS1399 A and AB configurations, nominal diameters and grip ranges, and request a quote from Webson.
// DIMENSION GUIDE
Blind-rivet diameter and joint grip
Schematic only; not to scale. Letter labels are keys for this illustration. Use the applicable part specification for dimensions, tolerances and measurement conventions.
// PART IDENTIFICATION
Preserve the complete A or AB designation
NAS1399 covers 100-degree flush-head locked-spindle blind rivets. The A and AB designations identify distinct configurations with different installation-tooling requirements. Keep these letters in the quote request.
// STOCKED SELECTION
Stocked NAS1399 part numbers
Selected stocked configurations are listed below. Dimensions are nominal identification references in inches; use the controlling specification and drawing for full tolerances and acceptance requirements.
No matching entries. Clear the filters or try a shorter search.
| Part number | Nominal diameter (in) | Grip range (in) | Configuration | Stock status | Request pricing |
|---|---|---|---|---|---|
| NAS1399B4AB2 | 1/8 | 0.063–0.125 | Aluminum / AB | Stocked item | Quote NAS1399B4AB2 → |
| NAS1399C5A4 | 5/32 | 0.188–0.250 | A286 CRES / A | Stocked item | Quote NAS1399C5A4 → |
| NAS1399C5AB2 | 5/32 | 0.065–0.125 | A286 CRES / AB | Stocked item | Quote NAS1399C5AB2 → |
Stocked items are subject to prior sale. Request a quote to confirm current availability and lead time.
// PART-NUMBER EXAMPLES
Read material, diameter and grip together
The selected B entry is aluminum; the selected C entries are A286 corrosion-resistant steel. NAS1399B4AB2 and NAS1399C5AB2 differ in both material and diameter.
Use each listed grip range rather than decoding the last number as a universal fraction. The minimum grip for the selected AB2 entries varies with diameter.
// PURCHASING CHECK
Confirm tooling before ordering
Manufacturer guidance distinguishes the A configuration from the AB configuration and its tooling. Confirm the complete rivet designation, approved installation process and compatible pulling head with the applicable tooling documentation.
A shared nominal diameter does not approve a change in material, grip range or locking construction.
// SOURCE WITH WEBSON
Related rivet references
Send the full part number, quantity, required delivery date and any approved-source or certification requirements to Webson.
// BUYER CHECKLIST
Prepare the requirement for quotation
- Complete designation, including all material, finish and locking suffixes.
- Quantity, required delivery date and controlling drawing or specification issue.
- Required certificates, source restrictions and lot traceability.
// SOURCE WITH WEBSON
Have a part number or bill of material?
Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.