MS35649 coarse-thread hex machine-screw nuts.

// REFERENCE SIZES

MS35649 part-number and dimension table

Reference selections for identification and quotation. Webson confirms availability by inquiry; these rows do not indicate stocked inventory.

Dimensions are minimum–maximum limits in inches from the reviewed reference. Width across flats is the distance between opposite hex faces; thickness is the nut’s axial height. Across-flats limits describe the part, not the tolerance of a wrench or socket.

// ORDERING EXAMPLES

Read the complete part number

MS35649-222 is a 2-56 carbon-steel nut with cadmium plating; MS35649-224 is the passivated CRES version. MS35649-225B identifies brass with black oxide, while MS35649-225T identifies tin-plated brass. The finish letter is part of the designation.

// MATERIAL AND FINISH

Retain the material and finish requirement

The selected carbon-steel dash numbers distinguish cadmium plating from phosphate coating; neither uses an added finish letter. The CRES rows are passivated. Brass rows use B for black oxide or T for tin plating. Other configurations in the standard are outside this selection. Preserve all finish letters instead of reducing the order to a bare dash number.

// FAMILY COMPARISON

Compare related nut families

MS35650 is the fine-thread machine-screw nut family. MS51967 is a finished hex nut family with separate strength grades and thickness requirements. For example, MS35649-2252 and MS51967-2 both have 1/4-20 threads, but their thickness limits differ.

// DRAWING REQUIREMENTS

Match the governing specification issue

Dimensions summarize MS35649H, sheets 1–2, 12 February 1988.

Reviewed historical MS35649H dimensional reference. The DLA record lists MS35649 as canceled and names NASM35649 as its successor. A document successor is not an automatic part-number conversion.

Include the complete designation, quantity, required delivery date and certificate or traceability requirements with your inquiry.