Components that join, route, seal and protect assemblies.
Webson Fasteners supplies rivets, grommets, clamps, gaskets, O-rings, cable ties and related components used throughout electronic, mechanical and equipment assemblies.
These components may be small, but they perform essential functions by securing panels, routing wires, protecting pass-through points, retaining parts and sealing interfaces. Webson helps manufacturers source these requirements through one experienced, AS9120B and ISO 9001 certified distributor.
The supporting components behind a reliable assembly.
Electronic and mechanical assemblies often require dozens of supporting components beyond their primary fasteners. Webson supplies and sources the hardware used to join parts, organize wiring, protect openings, retain components and seal equipment.
Customers can submit individual part numbers, drawings, samples or a complete bill of material for review.
Rivets and Rivet Nuts
Permanent and semi-permanent fastening components used to join panels, sheet materials and assemblies or create threaded attachment points.
Grommets
Components used to protect wires, cables, tubing and other materials where they pass through panels or openings.
Clamps
Hardware used to secure, support and route wires, cables, tubing and other components within an assembly.
Gaskets
Components used between mating surfaces to provide sealing, cushioning, spacing or environmental protection.
O-Rings
Circular sealing components supplied according to the required dimensions, material and application requirements.
Cable Ties
Components used to bundle, organize and retain wiring, cables and other items within equipment and assemblies.
Clips and Retaining Components
Hardware used to position, retain, guide or secure parts without a conventional threaded fastener.
Do not see the component you need? Send Webson the manufacturer part number, dimensions, drawing or application requirements for review.
Submit Your Requirements →Joining, protection and organization within the assembly.
The correct assembly component depends on the function it must perform and the environment in which it will be used. Webson can source components for several common assembly functions.
Joining
Rivets, rivet nuts and related components used to fasten panels, brackets, housings and other assembly elements.
Routing and Organization
Clamps, cable ties and supporting hardware used to manage wires, cables, tubing and harnesses.
Edge and Pass-Through Protection
Grommets and bushings used to protect materials passing through sheet metal, panels and enclosure openings.
Sealing and Cushioning
Gaskets and O-rings used between components where sealing, cushioning or separation is required.
Retention and Positioning
Clips, clamps and retaining components used to hold parts in their intended locations.
The customer’s part number, drawing and application requirements determine the correct component. Webson does not replace the customer’s engineering or design authority.
Specified for the component, opening and environment.
Assembly components are selected according to their dimensions, material, mounting method, surrounding components and operating environment. Providing complete information helps Webson identify and quote the correct product.
Dimensions
Provide component dimensions, panel thickness, hole size, groove size or other relevant measurements whenever available.
Material
Identify the required metal, plastic, rubber or other material when it is controlled by the drawing or application.
Mounting Method
Specify whether the component is pushed in, snapped in, threaded, riveted, bolted, tied or otherwise retained.
Environmental Requirements
Include any known requirements related to temperature, vibration, moisture, chemicals, corrosion or outdoor exposure.
Part Number or Drawing
Manufacturer part numbers, customer part numbers and drawings provide the best basis for accurate sourcing.
Quantity and Packaging
Include the required order quantity and any special packaging, labeling or kitting requirements.
When replacing an existing component, provide the complete manufacturer part number or an accurate drawing whenever possible.
Components for electronic and equipment assembly.
PCB and Electronic Equipment
Assembly components used around circuit boards, wiring, chassis and supporting electronic hardware.
Panels and Chassis
Rivets, grommets, clamps, gaskets and retaining components for sheet-metal and fabricated assemblies.
Cable and Wire Management
Clamps, ties, clips and protective components used to route and retain electrical wiring and harnesses.
Enclosures and Cabinets
Components used to fasten panels, protect openings, organize cables and seal equipment housings.
Lighting Equipment
Fastening, routing and protection components used in fixtures, housings and lighting-control assemblies.
Medical and Safety Equipment
Assembly components sourced for equipment where consistent specifications and dependable supply are important.
A dependable source for a diverse component list.
Assembly bills of material frequently contain many low-cost components from different product families. Webson helps customers consolidate those requirements and reduce the need to manage a separate supplier for each component category.
Manufacturer Part-Number Sourcing
Submit existing manufacturer part numbers or customer part numbers for review and quotation.
Broad Component Coverage
Source rivets, grommets, clamps, gaskets, O-rings, cable ties and related hardware through one distributor.
Drawing-Based Requirements
Webson can review drawings for special dimensions, materials, configurations and custom components.
Certified Quality System
Orders are supported through Webson’s AS9120B and ISO 9001 certified quality-management system.
Traceability and Documentation
Documentation can be supplied according to the applicable component and customer requirements.
Programs for recurring assembly requirements.
A missing rivet, grommet, clamp or cable tie can delay an otherwise complete production assembly. Webson’s value-added programs help customers organize and replenish recurring component requirements.
Vendor-Managed Inventory
Recurring components can be organized into a replenishment program based on customer usage and inventory requirements.
Bin Stocking
Frequently used assembly hardware can be organized and replenished at designated stocking or point-of-use locations.
Custom Kitting
Rivets, grommets, clamps, fasteners and related components can be grouped for a particular assembly or bill of material.
Scheduled and Just-in-Time Programs
Recurring requirements can be coordinated around planned releases and customer production schedules.
One source for fasteners and supporting components.
Webson combines broad product sourcing, quality-system controls and value-added services to support manufacturers whose assemblies require more than standard screws and bolts.
Four Decades of Experience
Webson has supplied fasteners and assembly components to manufacturers since 1986.
Broad Product Consolidation
Combine commercial fasteners, electronic hardware, assembly components, custom parts and Mil-Spec hardware through one distributor.
Certified Quality System
Webson is certified to AS9120B and ISO 9001 for the distribution of fastening products and installation tooling.
Custom and Standard Requirements
Webson can review catalog part numbers, recurring production requirements and drawing-based components.
Electronic assembly component questions.
Which electronic assembly components does Webson supply?
Webson supplies and sources rivets, rivet nuts, grommets, clamps, gaskets, O-rings, cable ties, clips and related supporting hardware for electronic, mechanical and equipment assemblies.
Can Webson source an existing manufacturer part number?
Yes. Submit the complete manufacturer part number, customer part number, required quantity and any applicable documentation requirements for review.
What information is needed to quote a grommet or clamp?
Provide the part number or drawing whenever available. Relevant information may include the component dimensions, panel thickness, hole size, cable or tubing diameter, material, mounting method and required quantity.
Can Webson supply custom assembly components?
Webson can review drawings for custom dimensions, materials and configurations. Manufacturing options and minimum quantities depend on the component and production requirements.
Can assembly components be included in a kit?
Yes. Fasteners, rivets, grommets, clamps and related components can be evaluated for custom kitting and packaging based on the customer’s assembly or bill of material.
Can these products be included in a vendor-managed inventory program?
Yes. Recurring assembly components can be evaluated for vendor-managed inventory, bin stocking and scheduled-release programs.
What information should I include with an assembly component RFQ?
Provide the manufacturer part number or drawing, required quantity, dimensions, material, application requirements, documentation requirements and requested delivery date whenever available.
More from Webson Fasteners.
Electronic Hardware
Standoffs, spacers, handles, knobs and mounting hardware for PCBs, panels and chassis.
Commercial Hardware
Bolts, screws, studs, nuts, washers and related standard fasteners.
Value-Added Services
Vendor-managed inventory, bin stocking, custom kitting and scheduled programs.
Sourcing components for an assembly?
Send Webson your part numbers, drawings, dimensions, quantities and application requirements. Our team will review the requirement and prepare a quote.