Skip to content

// TECHNICAL RESOURCES

Machine Screws.

A family reference for specification-controlled hardware. Identify the relevant series and the details needed to source the required part.

// DIMENSIONS & PART IDENTIFICATION

Machine-screw length and thread diameter

Machine-screw length and thread diameter
L is the length from the bearing surface under the head to the tip. d identifies nominal thread diameter. This raised-head example does not show the length convention for countersunk screws.

Schematic only; not to scale. Letter labels are keys for this illustration. Use the applicable part specification for dimensions, tolerances and measurement conventions.

// IDENTIFICATION

Identify the head, recess and thread.

A pan head sits above the bearing surface. A countersunk head fits a matching seat; the included angle is part of the requirement. A drilled fillister head adds another configuration that must be preserved.

Keep coarse and fine thread references distinct. MS51957 and MS51958 are separate series; MS24693 uses a 100-degree head while MS51959 is associated with an 82-degree head.

// REFERENCE TABLE

Series in this family

Scroll sideways to see all columns. The first column stays visible.

Machine screws series directory
SeriesProduct descriptionFamilyResource
MS24693100° flat cross-recessed machine screwsMachine screwsRead guide →
MS3519082° flat cross-recessed machine screws, coarse threadMachine screwsRead guide →
MS3519182° flat cross-recessed machine screws, fine threadMachine screwsRead guide →
MS35206Pan head cross-recessed machine screws, carbon steel, UNCMachine screwsRead guide →
MS35207Pan head cross-recessed machine screws, fine threadMachine screwsRead guide →
MS35265Drilled slotted fillister machine screws, coarse threadMachine screwsRead guide →
MS35266Drilled slotted fillister machine screws, fine threadMachine screwsRead guide →
MS35275Drilled slotted fillister machine screws, coarse thread, stainlessMachine screwsRead guide →
MS35276Drilled slotted fillister machine screws, fine thread, stainlessMachine screws
MS51957Pan head cross-recessed machine screws, corrosion-resistant steel, UNCMachine screwsRead guide →
MS51958Pan head cross-recessed machine screws, fine thread, stainlessMachine screwsRead guide →
MS5195982° flat cross-recessed machine screws, corrosion-resistant steel, UNCMachine screwsRead guide →
MS5196082° flat cross-recessed machine screws, fine thread, stainlessMachine screwsRead guide →
MS21318Type U round-head drive screwsMachine screws
MS51861Pan head Type AB tapping screwsMachine screws
NAS662100-degree flat-head machine screws, plain and self-lockingMachine screwsRead guide →
NAS8100A286 pan-head ribbed cruciform screws, 4-40Machine screwsRead guide →
NAS8101A286 pan-head ribbed cruciform screws, 6-32Machine screwsRead guide →

// PREPARE AN RFQ

What to confirm on the drawing

Head style and angle; drive/recess; nominal diameter; pitch; length convention; material and finish.

// REFERENCE SCOPE

Reference scope

The table groups hardware by catalog family. It does not certify dimensions or current stock. For a document-level status finding, use the cross-reference page; for a dimensional table, use the linked guide.

// SOURCE WITH WEBSON

Have a part number or bill of material?

Send the complete designation, quantity, required delivery date and documentation requirements. Webson will review your requirement for quotation.

Certified distribution. Requirements reviewed.

Webson is an AS9120B and ISO 9001:2015 certified distributor. Include required certificates, lot traceability and source restrictions with your inquiry so documentation and inspection requirements can be reviewed for the order.

Need a drawing-specific part?

Explore custom screws and bolts when the required geometry, material or finish calls for a made-to-print component. Your drawing and approval requirements define the custom configuration; Webson coordinates sourcing through manufacturing partners.